Concrete · Pavers · Travertine — Windermere & West Orlando, FL Fully Insured · Free Estimates · (689) 407-6658
Concrete Patios · Orange County

Concrete Patios in Orlando, FL

Central Florida’s anchor city — from College Park’s brick streets to Baldwin Park’s new urbanism and the MetroWest golf corridor. Outdoor-living slabs designed around how you actually entertain — poured with deliberate falls, layout-matched joints, and finishes that stay comfortable through a Florida summer.

Fully InsuredFree EstimatesServing all of OrlandoWritten proposal in one business day
Fully InsuredFree EstimatesWritten WarrantyARC / HOA Submittal Support48-Checkpoint Craft Code
The Short Answer — Orlando

In Orlando, FL, concrete patios typically run $8–$13 / sq ft installed at 2026 rates. Older Orlando neighborhoods hide clay lenses, buried debris, and mature root systems under original slabs — tear-outs get probed and re-based, because pouring over an unknown is how sixty-year-old problems become new ones. Windermere Concrete serves Orlando from its Windermere base — same-day reply, written proposal within one business day, fully insured.

Orlando — We work Orlando selectively — the neighborhoods where craftsmanship is the buying criterion, not the lowest bid. College Park, Delaney Park, and Audubon Park carry pre-war bungalows on brick streets, where a driveway is two ribbons of concrete under a live oak and the right answer respects the street’s character; these blocks generate constant walkway, ribbon-drive, and porch-apron work that big-volume outfits handle badly. Baldwin Park’s new-urbanist code produces alley-loaded garages, courtyard patios, and strict material standards closer to an ARC than a typical HOA. To the southwest, MetroWest and the Millenia corridor run on golf-community townhomes and 1990s single-family stock now cycling through driveway and pool-deck replacement. And across Conway and Dover Shores, mid-century block homes on the lake chain want honest tear-out-and-repour work with drainage that finally behaves. It is the widest range of any market we serve, and the Craft Code’s forty-eight checkpoints apply on every one of them.

For concrete patios specifically, that local picture translates into how we build. Older Orlando neighborhoods hide clay lenses, buried debris, and mature root systems under original slabs — tear-outs get probed and re-based, because pouring over an unknown is how sixty-year-old problems become new ones. Our answer is the same one we give every Orange County property: probe first, base in compacted lifts, engineer the falls, and document the work — all forty-eight checkpoints of the Windermere Craft Code, applied to your address. Typical demand we see here: ribbon drives and walkways in the bungalow districts, code-compliant hardscape in baldwin park, and replacement-cycle driveways and pool decks in metrowest and conway.

One more local reality worth naming: City of Orlando permitting; Baldwin Park and several districts enforce design codes on visible hardscape. We prepare the submittal documentation with your proposal, and we schedule work only after the approvals clear — the sequence that keeps projects friendly with the neighbors and the board.

Transparent Pricing

Concrete Patios pricing in Orlando

Investment guide — Concrete Patios in Orlando

Honest 2026 ranges · exact number in your written proposal
ScopeTypical rangeWhat’s included
Broom-finish patio slab$8–$13 / sq ftReinforced, sloped & jointed
Stamped decorative patio$15–$24 / sq ftPattern, color & sealer included
Decorative overlay (existing slab)$9–$16 / sq ftSurface prep included
Patio extension (doweled)$9–$14 / sq ftTied to the existing slab
Steps & landings$300–$900 eachFormed & finished to match
Fire-pit ring / grill pad$700–$1,800Sized to the equipment
Connecting walkway$9–$15 / sq ftMatched finish & joints
UV-stable sealer$1–$2.25 / sq ftProtects stamp & color
Ranges reflect typical site conditions in our service area. Access, demolition findings, and material selections move the number — the written proposal pins it, line by line.

Choosing the right system

Comparison, not upsell
OptionBest forWhy
Broom finishLanais, everyday family patiosGrippy, cool-toned, budget-honest
Stamped slate / flagstoneOutdoor rooms with stone characterIntegral color + release, UV-sealed
Wood-plank stampModern & farmhouse architecturePlank texture without the rot
Decorative overlaySound but dated existing slabsNew face, no demolition
Full Scope

Everything this service covers in Orlando

  • New patio slabs — broom, stamped, or exposed-aggregate finish
  • Patio extensions doweled into existing slabs
  • Stamped textures: slate, flagstone, ashlar & wood plank
  • Integral color & antiquing release, sample-matched
  • Decorative overlays on structurally sound slabs
  • Engineered falls — hose-tested drainage at handover
  • Screened-lanai & pool-cage slab preparation
  • Fire-pit rings, grill pads & kitchen footings (non-structural)
  • Steps, landings & grade transitions
  • Connecting walkways to pool, drive & entries
  • Layout-matched saw-cut control joints
  • Isolation joints at the house & fixed structures
  • UV-stable decorative sealing
  • ARC / HOA documentation where required
The Standard

The Windermere Craft Code

Eight phases, forty-eight checkpoints — applied in full on every Orlando concrete patios project. The base is photographed before it disappears, the drainage is hose-tested in front of you, and the warranty arrives in writing.

I

Consultation & Design Fit

  • Walk the property with the owner and map the exact footprint
  • Match material, color, and finish samples to the home’s architecture
  • Review community ARC / HOA design standards before anything is priced
  • Photograph existing surfaces, elevations, and tie-in points
  • Identify pool cages, lanais, and structures the new surface must respect
  • Deliver a written, line-itemized proposal within one business day
II

Ground Truth

  • Probe the subgrade for organics, muck pockets, and loose fill
  • Trace irrigation, low-voltage lighting, and utility runs before digging
  • Establish fall lines so every surface sheds water away from the home
  • Confirm setbacks and easements against the plat where applicable
  • Plan equipment access to protect lawns, gates, and driveways
  • Stake and string the final layout for owner sign-off
III

Demolition & Excavation

  • Saw-cut clean separation lines before any breakout begins
  • Remove existing concrete or pavers and haul debris the same day
  • Excavate to the engineered depth for the specified system
  • Undercut soft zones and rebuild them with structural fill
  • Protect adjacent surfaces, borders, and plantings during removal
  • Re-verify grades after excavation, before base goes in
IV

Base Engineering

  • Place crushed base rock in measured lifts — never one dump
  • Compact each lift mechanically and check with a probe rod
  • Screed the setting bed (sand or concrete) to uniform depth
  • Install geotextile separation where soils demand it
  • Hold positive slope through the base, not just the surface
  • Document the finished base with photos before covering it
V

Forming & Reinforcement

  • Set forms to string lines and verify diagonals on rectangles
  • Place reinforcement — fiber mix, wire, or rebar — per the proposal
  • Chair steel to ride mid-slab, never resting on grade
  • Lay out control-joint positions before the truck is scheduled
  • Isolate the new work from the house, pool shell, and footers
  • Final pre-pour inspection signed off by the crew lead
VI

Placement & Finish

  • Confirm mix design and PSI on the ticket before discharge
  • Screed, bull-float, and finish within the working window
  • Apply the specified texture — broom, stamp, trowel, or exposed
  • Lay pavers or travertine to the approved pattern and bond lines
  • Cut borders and soldier courses tight, with consistent joints
  • Match color and release against the approved sample in daylight
VII

Lock-In & Cure

  • Saw or tool control joints at the engineered spacing and depth
  • Cure slabs with compound or wet-cure — never left to chance
  • Compact the paver field and drive sand fully into the joints
  • Activate polymeric sand with a controlled wetting pass
  • Set edge restraint so the field cannot migrate
  • Post cure/set times and protect the surface from traffic
VIII

White-Glove Handover

  • Pressure-rinse the work zone and remove every form and stake
  • Hose-test drainage with the owner watching the water move
  • Apply sealer at the correct cure window when sealing is scoped
  • Walk the finished surface together, corner to corner
  • Hand over the care guide, cure calendar, and warranty in writing
  • Follow up after the first heavy rain to confirm performance

48 checkpoints · every project · no exceptions

What we don’t doWe do not build roofed structures, pergolas, or outdoor-kitchen enclosures — we pour the slabs, footings pads, and hardscape they stand on, and coordinate cleanly with your builder.
Local Coverage

Where we work in Orlando

College Park
Baldwin Park
Audubon Park
Delaney Park
SoDo
Thornton Park
Colonialtown North
Dover Shores
Conway
MetroWest
Millenia
Lake Como
Rowena Gardens
Orwin Manor
ZIPs32804328063281232814328193283532839
Questions, answered plainly

Concrete Patios in Orlando — asked & answered

What size should we build?

Start from the furniture, not the budget. A café table and two chairs live comfortably in 10×10; a true dining-plus-lounge outdoor room wants 16×20 or better; an outdoor kitchen adds a working zone beyond that. Before we form anything we stake and string the exact footprint on your grass so you can walk it, place chairs on it, and feel the size in person — the fifteen-minute step that prevents the most common patio regret, which is always ‘we should have gone two feet bigger.’

Stamped concrete or pavers for a patio — what would you honestly pick?

We install both, so the answer is criteria, not preference. Pick stamped concrete when you want a continuous, weed-proof surface with stone character at a lower installed cost, and you accept that any future repair means color-matching a patch. Pick pavers when you want the ability to lift and relay a section invisibly — after root movement or a utility trench — and you accept joint maintenance every few years. On tight-access lots where a mixer can’t reach, pavers win by logistics. We will tell you which side your specific yard lands on during the consultation, and we genuinely do not care which one you choose — we warranty both.

Does a concrete patio get too hot for bare feet?

A dark, smooth slab in full sun does; a well-chosen one doesn’t. Surface temperature is set by three choices we make together: color (lighter integral tones reflect meaningfully more heat), texture (broomed and stamped surfaces carry less contact area than steel-troweled ones), and shade planning around where the afternoon sun actually lands on your lot. If barefoot comfort is the priority — usually around pools — we will also show you the honest comparison against travertine and pavers, which run cooler by nature, so you pick with the full picture.

Can you resurface our existing patio instead of tearing it out?

If the slab under it is structurally sound — yes, and it saves real money. A decorative overlay bonds a new wearing surface over sound concrete: stamped, colored, or smooth. The gate is the word sound. Stains, dullness, and surface scaling are overlay candidates; through-cracks, heaving, and settlement are not, because an overlay over movement just prints the same crack in a new color within a year. We check the slab for deflection and drainage before quoting either path, and we will not sell you an overlay your slab doesn’t qualify for.

Do you actually work in Orlando, or just list it?

Orlando — served selectively: College Park and Delaney Park bungalow blocks, Baldwin Park’s code-governed new urbanism, MetroWest’s golf corridor, and Conway’s mid-century lake neighborhoods. We serve it as a core market from our Windermere base — close enough for the site visit this week, the written proposal within one business day, and the crew on schedule. Landmarks our trucks know well: Lake Eola, Dubsdread Golf Course, the Packing District, Leu Gardens, Baldwin Park’s New Broad Street, the Mall at Millenia.

How does the ground in Orlando affect concrete patios?

Older Orlando neighborhoods hide clay lenses, buried debris, and mature root systems under original slabs — tear-outs get probed and re-based, because pouring over an unknown is how sixty-year-old problems become new ones. That is exactly the class of condition the Craft Code’s Ground Truth phase exists for: we probe the subgrade before pricing, correct what we find, compact the base in measured lifts, and photograph it before it disappears under the finished surface.

Will I need a permit or HOA approval in Orlando?

City of Orlando permitting; Baldwin Park and several districts enforce design codes on visible hardscape. We flag what your specific project needs during the consultation and prepare the documentation with the proposal — approvals first, demolition second, always.

Free Estimate · Fully Insured

Let’s walk your Orlando project this week.

Walk the project with us. Get a written, line-itemized proposal within one business day — no pressure, no theater.

(689) 407-6658
Call Proposal
Call Now Free Proposal